ADR loading provision CV10
Cylinders lie along or across the vehicle axis (across at the front wall); stable or secured ones may stand; flat ones must be wedged.
Cylinders (as defined in 1.2.1) are laid parallel or at right angles to the vehicle or container long axis, with those near the forward transverse wall laid across it. Short, wide cylinders of about 30 cm diameter and over may lie lengthwise with valve protection pointing to the middle. Cylinders that are stable enough, or held in devices that stop them overturning, may stand upright. Cylinders laid flat must be wedged, attached or secured so they cannot move.
| Value | Applies when |
|---|---|
| about 30 cm | diameter of short cylinders that may be stowed longitudinally |
Refers to: 1.2.1.
Carried by 198 Table A entries
UN 1001 · UN 1002 · UN 1005 · UN 1006 · UN 1008 · UN 1009 · UN 1010 · UN 1011 · UN 1012 · UN 1013 · UN 1016 · UN 1017 · UN 1018 · UN 1020 · UN 1021 · UN 1022 · UN 1023 · UN 1026 · UN 1027 · UN 1028 and 177 more UN numbers
Source: ADR 2025 (ECE/TRANS/352), Volume II, section 7.5.11, CV10, page 607.
Paraphrase in FreightUtils' own words, not the official text. Not yet reviewed.
ADR 2027 amendments (accepted, applying from 1 January 2027) are not yet reflected on this page.