Carriage in packages

Conditions on the vehicle or container when the goods are carried in packages. These codes appear in Table A column 16; ADR sets them out in section 7.2.4 of ADR 2025 (ECE/TRANS/352). 11 codes are in use, 0 reviewed. Each meaning below is a paraphrase in FreightUtils' own words, not the official text.

• V12 · 360 rows
  IBCs of type 31HZ2 (31HA2, 31HB2, 31HN2, 31HD2, 31HH2) must be carried in closed vehicles or closed containers.
• V2 · 346 rows
  Class 1 packages may only travel on EX/II or EX/III vehicles meeting Part 9; the quantity carried decides which type is needed (7.5.5.2).
• V11 · 295 rows
  IBCs other than metal or rigid plastics IBCs must be carried in closed or sheeted vehicles or containers.
• V1 · 251 rows
  Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed.
• V8 · 75 rows
  Temperature control applies: follow 7.1.7; not applicable to inhibitor-stabilized 3.1.2.6 substances with SADT above 50 °C.
• V3 · 71 rows
  For free-flowing powders and for fireworks, the container floor must have a non-metallic surface or covering.
• V10 · 71 rows
  IBCs need a closed or sheeted vehicle, or a closed or sheeted container; open units are not allowed.
• V5 · 23 rows
  These packages must not be carried in small containers.
• V14 · 21 rows
  Aerosols and gas cartridges sent for reprocessing or disposal under SP 327 need ventilated or open vehicles or containers.
• V13 · 4 rows
  If packed in 5H1, 5L1 or 5M1 bags, the goods must be carried in closed vehicles or closed containers.
• V15 · 1 row
  IBCs must be carried in closed vehicles or closed containers; sheeted units are not enough.