- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 1: at most 20 per transport unit under 1.1.3.6, counted ×50 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 8 (Corrosive substances) (ADR 5.2.2.2.2, label model No. 8; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Packing
- Packing instruction P001: General packing instruction for liquids: combination, single, composite packagings and pressure receptacles, with capacity/mass limits by packing group. Mixed packing provision MP8: Up to 3 litres per inner packaging may be mixed with same-class goods of other classification codes or with non-ADR goods. Mixed packing provision MP17: Up to 0.5 litre per inner and 1 litre per package may be mixed with other classes (not Class 7) that permit it, or with non-ADR goods. (ADR 4.1.4.1, P001, 4.1.10.4, MP8, 4.1.10.4, MP17; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Tanks
- Portable tank instruction T20: Portable tank, Class 1 and 3–9: test 10 bar; shell 8 mm; relief See 6.7.2.8.3; bottom openings Not allowed. Portable tank provision TP4: Degree of filling capped at 90 %, or another figure the competent authority approves. Portable tank provision TP25: Sulphur trioxide of 99.95 % purity or more may go without inhibitor if kept at or above 32.5 °C. Portable tank provision TP26: When carried heated, the heating device goes outside the shell (for UN 3176 only if it reacts dangerously with water). Tank code L10BH: ADR tank code for Classes 1 and 3–9: liquid tank, 10 bar, openings B, hermetically closed. — L: tank for liquid-state substances (liquids, or solids handed over molten); 10: minimum calculation pressure of 10 bar (see 6.8.2.1.14); B: filling or discharge openings at the bottom, each with 3 closures; H: hermetically closed (see 1.2.1) Tank provision TU32: Tanks may be filled to no more than 88 % of capacity. Tank provision TE13: Tanks must be thermally insulated and fitted with an external heating device. Tank provision TT5: Hydraulic pressure tests every 3 years at most for fixed and demountable tanks, every 2½ years for tank-containers. Tank provision TM3: Plate must also give the proper shipping name and, in kg, the highest load mass permitted for this substance. Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T20, 4.2.5.3, TP4, 4.2.5.3, TP25, 4.2.5.3, TP26, 4.3.4.1.1, tank code L10BH, 4.3.5, TU32, 6.8.4 (b), TE13, 6.8.4 (d), TT5, 6.8.4 (e), TM3, 9.1.1.2, AT vehicle; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Carriage
- Carriage provision V8: Temperature control applies: follow 7.1.7; not applicable to inhibitor-stabilized 3.1.2.6 substances with SADT above 50 °C. Operation provision S4: Temperature control: see 7.1.7; not applicable to inhibitor-stabilized 3.1.2.6 substances with SADT above 50 °C. Operation provision S20: Chapter 8.4 supervision applies above 10 000 kg in packages, or above 3 000 litres in tanks. (ADR 7.2.4, V8, 8.5, S4, 8.5, S20; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)