- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 3: at most 1000 per transport unit under 1.1.3.6, counted ×1 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 4.2 (Substances liable to spontaneous combustion), model 4.3 (Substances which emit flammable gases in contact with water) (ADR 5.2.2.2.2, label model No. 4.2, 5.2.2.2.2, label model No. 4.3; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Packing
- Packing instruction P002: General packing instruction for solids: combination, single, composite packagings and pressure receptacles, with net mass limits by packing group. Packing instruction IBC06: Solids under IBC06 may use metal, rigid plastics or composite (11HZ1/11HZ2/21HZ1/21HZ2/31HZ1) IBCs; see 4.1.3.4 if they may liquefy. Packing instruction R001: R001 permits light gauge metal packagings 0A1 and 0A2 up to 40 l / 50 kg for packing groups II and III; packing group I is not allowed. Mixed packing provision MP14: Up to 6 kg per inner packaging may be mixed with goods of other codes or classes that permit it, or with non-ADR goods. (ADR 4.1.4.1, P002, 4.1.4.2, IBC06, 4.1.4.1, R001, 4.1.10.4, MP14; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Tanks
- Portable tank instruction T1: Portable tank, Class 1 and 3–9: test 1.5 bar; shell See 6.7.2.4.2; relief Normal; bottom openings See 6.7.2.6.2. Portable tank provision TP33: The assigned tank instruction covers granular/powdered solids and solids loaded hot but carried as a solid mass. Tank code SGAN: ADR tank code for Classes 1 and 3–9: solid tank, G (general minimum), openings A, valves/devices N. — S: tank for solid-state substances (powdery or granular); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; A: filling or discharge openings at the bottom, each with 2 closures; N: has no 6.8.2.2.6 breather device and is not hermetically closed Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T1, 4.2.5.3, TP33, 4.3.4.1.1, tank code SGAN, 9.1.1.2, AT vehicle; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Carriage
- Carriage provision V1: Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed. Bulk carriage VC1: Bulk carriage allowed in sheeted vehicles, sheeted containers or sheeted bulk containers (BK1 also usable if 7.3.3.2 met). Bulk carriage VC2: Bulk carriage allowed in closed vehicles, closed containers or closed bulk containers (BK2 also usable if 7.3.3.2 met). Bulk provision AP1: For VC bulk carriage, the vehicle or container needs a metal body, and any sheet fitted must be non-combustible. (ADR 7.2.4, V1, 7.3.3.1, VC1, 7.3.3.1, VC2, 7.3.3.2, AP1; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)