- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 3: at most 1000 per transport unit under 1.1.3.6, counted ×1 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 4.2 (Substances liable to spontaneous combustion) (ADR 5.2.2.2.2, label model No. 4.2; paraphrase, not yet reviewed)
- Packing
- Packing instruction P002: General packing instruction for solids: combination, single, composite packagings and pressure receptacles, with net mass limits by packing group. Packing instruction IBC08: IBC08 is the widest solids IBC instruction: metal, rigid plastics, composite, fibreboard 11G, wooden and flexible 13-series IBCs. Packing instruction LP02: Solids in large packagings: glass, plastics, metal, paper or fibre inners in 50-series or 51H outers, packing group III only, up to 3 m3. Packing instruction R001: R001 permits light gauge metal packagings 0A1 and 0A2 up to 40 l / 50 kg for packing groups II and III; packing group I is not allowed. Special packing provision PP20: Any sift-proof, tearproof receptacle may be used: UN 2217 in P002; UN 1363, 1386, 1408 and 2793 in P003. Special packing provision B3: Flexible IBCs must be sift-proof and water-resistant, or carry a liner that is. Special packing provision B6: For certain solids (e.g. UN 1363, 1408, 2211, 3314) the IBCs need not pass the Chapter 6.5 IBC tests. Mixed packing provision MP14: Up to 6 kg per inner packaging may be mixed with goods of other codes or classes that permit it, or with non-ADR goods. (ADR 4.1.4.1, P002, 4.1.4.2, IBC08, 4.1.4.3, LP02, 4.1.4.1, R001, 4.1.4.1, P002, PP20, 4.1.4.2, IBC08, B3, 4.1.4.2, IBC08, B6, 4.1.10.4, MP14; paraphrase, not yet reviewed)
- Tanks
- Bulk container code BK2: Bulk carriage in closed bulk containers is allowed for the substance, subject to Chapter 6.11 and 7.3.2. (ADR 7.3.2.1, BK2; paraphrase, not yet reviewed)
- Carriage
- Carriage provision V1: Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed. Bulk carriage VC1: Bulk carriage allowed in sheeted vehicles, sheeted containers or sheeted bulk containers (BK1 also usable if 7.3.3.2 met). Bulk carriage VC2: Bulk carriage allowed in closed vehicles, closed containers or closed bulk containers (BK2 also usable if 7.3.3.2 met). Bulk provision AP1: For VC bulk carriage, the vehicle or container needs a metal body, and any sheet fitted must be non-combustible. (ADR 7.2.4, V1, 7.3.3.1, VC1, 7.3.3.1, VC2, 7.3.3.2, AP1; paraphrase, not yet reviewed)