- Tunnels
- Tunnel code (B/E): in tanks, Prohibited in B, C, D, E; in other carriage, Prohibited in E. Tanks: A only. Packages: A, B, C, D. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 0: no 1.1.3.6 exemption applies (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 4.3 (Substances which emit flammable gases in contact with water), model 8 (Corrosive substances) (ADR 5.2.2.2.2, label model No. 4.3, 5.2.2.2.2, label model No. 8; paraphrase, not yet reviewed)
- Packing
- Packing instruction P403: Hermetically sealed solids packagings: combination (inners glass 2 kg, plastics 15 kg, metal 20 kg), single drums/jerricans, composites, pressure receptacles. Mixed packing provision MP2: No mixed packing: the goods must be alone in their package. (ADR 4.1.4.1, P403, 4.1.10.4, MP2; paraphrase, not yet reviewed)
- Tanks
- Portable tank instruction T9: Portable tank, Class 1 and 3–9: test 4 bar; shell 6 mm; relief Normal; bottom openings Not allowed. Portable tank provision TP7: Air must be removed from the vapour space, by nitrogen or another method. Portable tank provision TP33: The assigned tank instruction covers granular/powdered solids and solids loaded hot but carried as a solid mass. Tank code S10AN: ADR tank code for Classes 1 and 3–9: solid tank, 10 bar, openings A, valves/devices N. — S: tank for solid-state substances (powdery or granular); 10: minimum calculation pressure of 10 bar (see 6.8.2.1.14); A: filling or discharge openings at the bottom, each with 2 closures; N: has no 6.8.2.2.6 breather device and is not hermetically closed Tank code L10DH: ADR tank code for Classes 1 and 3–9: liquid tank, 10 bar, openings D, hermetically closed. — L: tank for liquid-state substances (liquids, or solids handed over molten); 10: minimum calculation pressure of 10 bar (see 6.8.2.1.14); D: filled and discharged from the top; nothing opens below the liquid surface; H: hermetically closed (see 1.2.1) Tank provision TU4: Cargo kept under an inert gas blanket of 50 kPa (0.5 bar) gauge or more; uncleaned empty tanks likewise charged with inert gas. Tank provision TU14: Protective caps on the closures must be locked during carriage. Tank provision TU22: Fill to no more than 90 % of capacity; for liquids leave 5 % empty at an average liquid temperature of 50 °C. Tank provision TE21: Closures must be protected by lockable caps. Tank provision TM2: Tanks must additionally be marked "Do not open during carriage" and "Gives off flammable gases on contact with water". Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T9, 4.2.5.3, TP7, 4.2.5.3, TP33, 4.3.4.1.1, tank code S10AN, 4.3.4.1.1, tank code L10DH, 4.3.5, TU4, 4.3.5, TU14, 4.3.5, TU22, 6.8.4 (b), TE21, 6.8.4 (e), TM2, 9.1.1.2, AT vehicle; paraphrase, not yet reviewed)
- Carriage
- Carriage provision V1: Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed. Loading provision CV23: Take special measures when handling packages so they never come into contact with water. Operation provision S20: Chapter 8.4 supervision applies above 10 000 kg in packages, or above 3 000 litres in tanks. (ADR 7.2.4, V1, 7.5.11, CV23, 8.5, S20; paraphrase, not yet reviewed)