- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 3: at most 1000 per transport unit under 1.1.3.6, counted ×1 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 5.1 (Oxidizing substances), model 8 (Corrosive substances) (ADR 5.2.2.2.2, label model No. 5.1, 5.2.2.2.2, label model No. 8; paraphrase, not yet reviewed)
- Packing
- Packing instruction P002: General packing instruction for solids: combination, single, composite packagings and pressure receptacles, with net mass limits by packing group. Packing instruction IBC08: IBC08 is the widest solids IBC instruction: metal, rigid plastics, composite, fibreboard 11G, wooden and flexible 13-series IBCs. Packing instruction R001: R001 permits light gauge metal packagings 0A1 and 0A2 up to 40 l / 50 kg for packing groups II and III; packing group I is not allowed. Special packing provision B4: Flexible, fibreboard and wooden IBCs must be sift-proof and water-resistant, or be lined with a liner that is. Special packing provision B13: Informative note: IMDG Code prohibits sea carriage in IBCs of UN 1748, 2208, 2880, 3485, 3486 and 3487. Mixed packing provision MP2: No mixed packing: the goods must be alone in their package. (ADR 4.1.4.1, P002, 4.1.4.2, IBC08, 4.1.4.1, R001, 4.1.4.2, IBC08, B4, 4.1.4.2, IBC08, B13, 4.1.10.4, MP2; paraphrase, not yet reviewed)
- Tanks
- Tank code SGAN: ADR tank code for Classes 1 and 3–9: solid tank, G (general minimum), openings A, valves/devices N. — S: tank for solid-state substances (powdery or granular); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; A: filling or discharge openings at the bottom, each with 2 closures; N: has no 6.8.2.2.6 breather device and is not hermetically closed Tank provision TU3: Shell interior and every part touching the substance kept clean; no lubricant that could react dangerously with it on pumps or valves. Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.3.4.1.1, tank code SGAN, 4.3.5, TU3, 9.1.1.2, AT vehicle; paraphrase, not yet reviewed)
- Carriage
- Loading provision CV24: Clean the vehicle or container of combustible debris before loading; no readily flammable stowage material. Loading provision CV35: Bags used as single packagings must be spaced apart enough to let heat dissipate. (ADR 7.5.11, CV24, 7.5.11, CV35; paraphrase, not yet reviewed)