- Small-load exemption
- Transport category 3: at most 1000 per transport unit under 1.1.3.6, counted ×1 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 9 (Miscellaneous dangerous substances and articles) (ADR 5.2.2.2.2, label model No. 9; paraphrase, not yet reviewed)
- Packing
- Packing instruction P001: General packing instruction for liquids: combination, single, composite packagings and pressure receptacles, with capacity/mass limits by packing group. Packing instruction IBC03: Liquids under IBC03 may use metal 31-series, rigid plastics 31H1/31H2 or a wider set of 31H composite IBCs. Packing instruction LP01: Liquids in large packagings: glass, plastics or metal inners in 50-series outers, packing group III only, up to 3 m3. Packing instruction R001: R001 permits light gauge metal packagings 0A1 and 0A2 up to 40 l / 50 kg for packing groups II and III; packing group I is not allowed. Special packing provision PP1: Small (≤ 5 L) metal or plastics packagings of certain paints, inks, adhesives etc. in PG II/III need no Chapter 6.1 tests if palletized or inner. Mixed packing provision MP19: Up to 5 litres per inner packaging may be mixed with goods of other codes or classes that permit it, or with non-ADR goods. (ADR 4.1.4.1, P001, 4.1.4.2, IBC03, 4.1.4.3, LP01, 4.1.4.1, R001, 4.1.4.1, P001, PP1, 4.1.10.4, MP19; paraphrase, not yet reviewed)
- Tanks
- Portable tank instruction T4: Portable tank, Class 1 and 3–9: test 2.65 bar; shell See 6.7.2.4.2; relief Normal; bottom openings See 6.7.2.6.3. Portable tank provision TP1: Portable tank must not be filled beyond the degree of filling set by 4.2.1.9.2 (the 97-based formula). Portable tank provision TP29: A 1.5 bar minimum test pressure tank may be used if 1.5 bar or less is shown acceptable under 6.7.2.1. Tank code LGBV: ADR tank code for Classes 1 and 3–9: liquid tank, G (general minimum), openings B, valves/devices V. — L: tank for liquid-state substances (liquids, or solids handed over molten); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; B: filling or discharge openings at the bottom, each with 3 closures; V: has a 6.8.2.2.6 breather device but no flame-propagation protection, or is not explosion-pressure-shock resistant Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T4, 4.2.5.3, TP1, 4.2.5.3, TP29, 4.3.4.1.1, tank code LGBV, 9.1.1.2, AT vehicle; paraphrase, not yet reviewed)
- Carriage
- Carriage provision V12: IBCs of type 31HZ2 (31HA2, 31HB2, 31HN2, 31HD2, 31HH2) must be carried in closed vehicles or closed containers. Loading provision CV13: After a leak or spill, clean (and if needed disinfect or decontaminate) the vehicle or container before reuse; check other goods for contamination. (ADR 7.2.4, V12, 7.5.11, CV13; paraphrase, not yet reviewed)