- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 3: at most 1000 per transport unit under 1.1.3.6, counted ×1 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 4.3 (Substances which emit flammable gases in contact with water), model 4.2 (Substances liable to spontaneous combustion) (ADR 5.2.2.2.2, label model No. 4.3, 5.2.2.2.2, label model No. 4.2; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Packing
- Packing instruction P410: Solids of PG II/III: combination, single drums, jerricans, boxes, bags, composites and pressure receptacles, with net mass limits. Packing instruction IBC08: IBC08 is the widest solids IBC instruction: metal, rigid plastics, composite, fibreboard 11G, wooden and flexible 13-series IBCs. Special packing provision B4: Flexible, fibreboard and wooden IBCs must be sift-proof and water-resistant, or be lined with a liner that is. Mixed packing provision MP14: Up to 6 kg per inner packaging may be mixed with goods of other codes or classes that permit it, or with non-ADR goods. (ADR 4.1.4.1, P410, 4.1.4.2, IBC08, 4.1.4.2, IBC08, B4, 4.1.10.4, MP14; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Tanks
- Portable tank instruction T1: Portable tank, Class 1 and 3–9: test 1.5 bar; shell See 6.7.2.4.2; relief Normal; bottom openings See 6.7.2.6.2. Portable tank provision TP33: The assigned tank instruction covers granular/powdered solids and solids loaded hot but carried as a solid mass. Tank code SGAN: ADR tank code for Classes 1 and 3–9: solid tank, G (general minimum), openings A, valves/devices N. — S: tank for solid-state substances (powdery or granular); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; A: filling or discharge openings at the bottom, each with 2 closures; N: has no 6.8.2.2.6 breather device and is not hermetically closed Tank code L4DH: ADR tank code for Classes 1 and 3–9: liquid tank, 4 bar, openings D, hermetically closed. — L: tank for liquid-state substances (liquids, or solids handed over molten); 4: minimum calculation pressure of 4 bar (see 6.8.2.1.14); D: filled and discharged from the top; nothing opens below the liquid surface; H: hermetically closed (see 1.2.1) Tank provision TU14: Protective caps on the closures must be locked during carriage. Tank provision TE21: Closures must be protected by lockable caps. Tank provision TM2: Tanks must additionally be marked "Do not open during carriage" and "Gives off flammable gases on contact with water". Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T1, 4.2.5.3, TP33, 4.3.4.1.1, tank code SGAN, 4.3.4.1.1, tank code L4DH, 4.3.5, TU14, 6.8.4 (b), TE21, 6.8.4 (e), TM2, 9.1.1.2, AT vehicle; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)
- Carriage
- Carriage provision V1: Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed. Loading provision CV23: Take special measures when handling packages so they never come into contact with water. (ADR 7.2.4, V1, 7.5.11, CV23; paraphrase, machine-reviewed (two independent readings of the UNECE text agreed with it), not yet reviewed by a person)