- Tunnels
- Tunnel code (D): in tanks, Prohibited in D, E; in other carriage, Prohibited in D, E. Categories A, B, C. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 2: at most 333 per transport unit under 1.1.3.6, counted ×3 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 4.1 (Flammable solids, self-reactive and polymerizing substances, and solid desensitized explosives) (ADR 5.2.2.2.2, label model No. 4.1; paraphrase, not yet reviewed)
- Packing
- Packing instruction P002: General packing instruction for solids: combination, single, composite packagings and pressure receptacles, with net mass limits by packing group. Packing instruction IBC07: IBC07 adds wooden IBCs (11C, 11D, 11F) with siftproof liners to the metal, rigid plastics and composite types of IBC06. Special packing provision PP92: UN 3531 and 3533 packagings must be built to vent gas or vapour so pressure cannot burst them if stabilization fails. Special packing provision B18: UN 3531 and 3533 IBCs must be built to vent gas or vapour so pressure cannot burst them if stabilization fails. (ADR 4.1.4.1, P002, 4.1.4.2, IBC07, 4.1.4.1, P002, PP92, 4.1.4.2, IBC07, B18; paraphrase, not yet reviewed)
- Tanks
- Portable tank instruction T7: Portable tank, Class 1 and 3–9: test 4 bar; shell See 6.7.2.4.2; relief Normal; bottom openings See 6.7.2.6.3. Portable tank provision TP4: Degree of filling capped at 90 %, or another figure the competent authority approves. Portable tank provision TP6: Tank needs pressure-relief devices sized to its capacity and the substance so it cannot burst, even in a fire. Portable tank provision TP33: The assigned tank instruction covers granular/powdered solids and solids loaded hot but carried as a solid mass. Tank code SGAN(+): ADR tank code for Classes 1 and 3–9: solid tank, G (general minimum), openings A, valves/devices N, suffix (+). — S: tank for solid-state substances (powdery or granular); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; A: filling or discharge openings at the bottom, each with 2 closures; N: has no 6.8.2.2.6 breather device and is not hermetically closed; (+): alternative use of the tank for other substances is allowed only where the certificate of type approval says so (3.2.1 column (12); 4.3.4.1.3) Tank provision TU30: Fill as set in the tank type-approval test report, and never above 90 % of capacity. Tank provision TE11: Shell and service equipment must keep out foreign matter, prevent leakage and stop dangerous decomposition pressure; a suitable safety valve suffices. Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T7, 4.2.5.3, TP4, 4.2.5.3, TP6, 4.2.5.3, TP33, 4.3.4.1.1, tank code SGAN(+), 4.3.5, TU30, 6.8.4 (b), TE11, 9.1.1.2, AT vehicle; paraphrase, not yet reviewed)
- Carriage
- Carriage provision V1: Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed. Loading provision CV15: Pointer: the mixed-loading limits in 7.5.5.3 apply. Loading provision CV22: Load for free air circulation; above 5 000 kg per vehicle or large container, split into stacks ≤ 5 000 kg with ≥ 0.05 m gaps. (ADR 7.2.4, V1, 7.5.11, CV15, 7.5.11, CV22; paraphrase, not yet reviewed)