- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 0: no 1.1.3.6 exemption applies (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 4.3 (Substances which emit flammable gases in contact with water) (ADR 5.2.2.2.2, label model No. 4.3; paraphrase, not yet reviewed)
- Packing
- Packing instruction P410: Solids of PG II/III: combination, single drums, jerricans, boxes, bags, composites and pressure receptacles, with net mass limits. Packing instruction IBC08: IBC08 is the widest solids IBC instruction: metal, rigid plastics, composite, fibreboard 11G, wooden and flexible 13-series IBCs. Packing instruction R001: R001 permits light gauge metal packagings 0A1 and 0A2 up to 40 l / 50 kg for packing groups II and III; packing group I is not allowed. Special packing provision B4: Flexible, fibreboard and wooden IBCs must be sift-proof and water-resistant, or be lined with a liner that is. Mixed packing provision MP14: Up to 6 kg per inner packaging may be mixed with goods of other codes or classes that permit it, or with non-ADR goods. (ADR 4.1.4.1, P410, 4.1.4.2, IBC08, 4.1.4.1, R001, 4.1.4.2, IBC08, B4, 4.1.10.4, MP14; paraphrase, not yet reviewed)
- Tanks
- Portable tank instruction T1: Portable tank, Class 1 and 3–9: test 1.5 bar; shell See 6.7.2.4.2; relief Normal; bottom openings See 6.7.2.6.2. Portable tank provision TP33: The assigned tank instruction covers granular/powdered solids and solids loaded hot but carried as a solid mass. Tank code SGAN: ADR tank code for Classes 1 and 3–9: solid tank, G (general minimum), openings A, valves/devices N. — S: tank for solid-state substances (powdery or granular); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; A: filling or discharge openings at the bottom, each with 2 closures; N: has no 6.8.2.2.6 breather device and is not hermetically closed Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T1, 4.2.5.3, TP33, 4.3.4.1.1, tank code SGAN, 9.1.1.2, AT vehicle; paraphrase, not yet reviewed)
- Carriage
- Carriage provision V1: Packages must go on a closed or sheeted vehicle or in a closed or sheeted container; open vehicles and containers are not allowed. Bulk carriage VC1: Bulk carriage allowed in sheeted vehicles, sheeted containers or sheeted bulk containers (BK1 also usable if 7.3.3.2 met). Bulk carriage VC2: Bulk carriage allowed in closed vehicles, closed containers or closed bulk containers (BK2 also usable if 7.3.3.2 met). Bulk provision AP3: Sheeted vehicles or containers only when the substance is in pieces, not powder, granules, dust or ash. Bulk provision AP4: Closed vehicles or containers must have hermetically sealed filling and discharge openings, keeping gas in and moisture out. Bulk provision AP5: Cargo doors of closed vehicles or containers must carry a "WARNING NO VENTILATION OPEN WITH CAUTION" mark, letters ≥ 25 mm. Loading provision CV23: Take special measures when handling packages so they never come into contact with water. (ADR 7.2.4, V1, 7.3.3.1, VC1, 7.3.3.1, VC2, 7.3.3.2, AP3, 7.3.3.2, AP4, 7.3.3.2, AP5, 7.5.11, CV23; paraphrase, not yet reviewed)