- Tunnels
- Tunnel code (E): in tanks, Prohibited in E; in other carriage, Prohibited in E. Every category except E. (ADR 8.6.4; from the ADR table itself)
- Small-load exemption
- Transport category 3: at most 1000 per transport unit under 1.1.3.6, counted ×1 toward the 1,000-point limit (ADR 1.1.3.6.3; from the ADR table itself)
- Labels
- Labels: model 5.1 (Oxidizing substances) (ADR 5.2.2.2.2, label model No. 5.1; paraphrase, not yet reviewed)
- Packing
- Packing instruction P002: General packing instruction for solids: combination, single, composite packagings and pressure receptacles, with net mass limits by packing group. Packing instruction IBC08: IBC08 is the widest solids IBC instruction: metal, rigid plastics, composite, fibreboard 11G, wooden and flexible 13-series IBCs. Packing instruction LP02: Solids in large packagings: glass, plastics, metal, paper or fibre inners in 50-series or 51H outers, packing group III only, up to 3 m3. Packing instruction R001: R001 permits light gauge metal packagings 0A1 and 0A2 up to 40 l / 50 kg for packing groups II and III; packing group I is not allowed. Special packing provision B3: Flexible IBCs must be sift-proof and water-resistant, or carry a liner that is. Mixed packing provision MP10: Up to 5 kg per inner packaging may be mixed with same-class goods of other codes, other classes that permit it, or non-ADR goods. (ADR 4.1.4.1, P002, 4.1.4.2, IBC08, 4.1.4.3, LP02, 4.1.4.1, R001, 4.1.4.2, IBC08, B3, 4.1.10.4, MP10; paraphrase, not yet reviewed)
- Tanks
- Portable tank instruction T1: Portable tank, Class 1 and 3–9: test 1.5 bar; shell See 6.7.2.4.2; relief Normal; bottom openings See 6.7.2.6.2. Bulk container code BK1: Bulk carriage in sheeted bulk containers is allowed for the substance, subject to Chapter 6.11 and 7.3.2. Bulk container code BK2: Bulk carriage in closed bulk containers is allowed for the substance, subject to Chapter 6.11 and 7.3.2. Bulk container code BK3: Carriage in flexible bulk containers is allowed: max 14 t gross, height-to-width ≤ 1.1, two-year service life. Portable tank provision TP33: The assigned tank instruction covers granular/powdered solids and solids loaded hot but carried as a solid mass. Tank code SGAV: ADR tank code for Classes 1 and 3–9: solid tank, G (general minimum), openings A, valves/devices V. — S: tank for solid-state substances (powdery or granular); G: minimum calculation pressure under the general requirements of 6.8.2.1.14; A: filling or discharge openings at the bottom, each with 2 closures; V: has a 6.8.2.2.6 breather device but no flame-propagation protection, or is not explosion-pressure-shock resistant Tank provision TU3: Shell interior and every part touching the substance kept clean; no lubricant that could react dangerously with it on pumps or valves. Vehicle for tank carriage: AT — Tank vehicle for dangerous goods that is not EX/III, FL or a MEMU: tanks over 1 m³ / 3 m³, or battery-vehicle over 1 m³. (ADR 4.2.5.2.6, portable tank instruction T1, 7.3.2.1, BK1, 7.3.2.1, BK2, 7.3.2.1, BK3, 4.2.5.3, TP33, 4.3.4.1.1, tank code SGAV, 4.3.5, TU3, 9.1.1.2, AT vehicle; paraphrase, not yet reviewed)
- Carriage
- Bulk carriage VC1: Bulk carriage allowed in sheeted vehicles, sheeted containers or sheeted bulk containers (BK1 also usable if 7.3.3.2 met). Bulk carriage VC2: Bulk carriage allowed in closed vehicles, closed containers or closed bulk containers (BK2 also usable if 7.3.3.2 met). Bulk provision AP6: Wooden or combustible bodies need an impermeable, combustion-resistant surfacing or sodium silicate coating; sheets impermeable and non-combustible. Bulk provision AP7: Bulk carriage is permitted only as a full load. Loading provision CV24: Clean the vehicle or container of combustible debris before loading; no readily flammable stowage material. (ADR 7.3.3.1, VC1, 7.3.3.1, VC2, 7.3.3.2, AP6, 7.3.3.2, AP7, 7.5.11, CV24; paraphrase, not yet reviewed)